ASL-1K5-PSD-V1
Headquarter
- 220Vac
Input Operating Voltage Range - 47-63 Hz (Optional adjustable up to 400Hz)
Input Operating Frequency Range - Ethernet Communication
Product Specifications
- Operating Temperature Range:
0 oC +40 oC (Optional -32 oC +55 oC) - Width: 132±1 mm,
Height: 100±1 mm,
Depth: 409±1 mm - Weight: 9±0,2 kg
- Yield
>>93% (at 220 VAC input voltage, from half load to full load)
Compliance with Military Standards
- MIL-STD-810E-G: Compliance with Environmental Conditions
- MIL-STD-461G: Electromagnetic compatibility
- MIL-STD-1275E: Electrical Compatibility in Military-Class Vehicles
- EN60950-1, EN60215 and MIL-HDBK- 454.
TECHNICAL SPECIFICATIONS
AC Input Specifications
- Power Source Phasing
1 Phase - Power Distribution
3 wires (1 phase, neutral, ground or 2 phases and ground) - Input Voltage
220 VRMS
The unit withstands 220V ± 5% without any time limitation.
The unit withstands ±20% in the worst case excursion from nominal voltage during 2 seconds. - Input Frequency Range
50Hz
The unit withstands 50Hz ± 3% without any time limitation
The unit withstands 50Hz ± 5,5% in the worst case excursion from nominal voltage during 2 seconds. - Waveform
For the main voltage 220V 50Hz, the unit withstands the MIL-STD-1399. Applicable for Type-1.The unit withstands total harmonic distortion: Max. 5%. % 5
The unit withstands single harmonic: Max. 3%. % 3
The unit withstands deviation factor: Max. 5% % 5 - Emergency Condition
The unit withstands the following emergency conditions: MIL-STD-1399-300B Figure-8.
Frequency excursion: -100 / + 12% (2 minutes) -> Nominal frequency (50Hz) + 12%
Voltage excursion: -100 / + 35% (2 minutes)
-> Nominal voltage (220V) + 35% - Short Interruption
The unit withstands without performance degradation, a power interruption less than 5 ms. - Power Interruption
The unit stops for a power greater than 5 ms, and automatically restarts. - Power Factor at Full-Load
> 0,95 (at 220V@50Hz) - Efficiency at Full-Load
> %92 - Efficiency at Half-Load
> %90 - Total Harmonic Distortion
<%10
Output Characteristics
- Total Power
13200W - Output Power at +48V with Full-Load (4 Channel)
11520W (4x2880W) - Output Power at +24V with Full-Load (4 Channel)
576W (4x144W) 1600W (4×400)
833.33 Hz %10 Duty-Load - Output Power at +12V with Full-Load (1 Channel)
48W - Output Power at +5V with Full-Load (1 Channel)
25W - Output Power at –5V with Full-Load (1 Channel)
1W - Pulsed Current Width
1-120 µs - Load Regulation at Full Load
1,5-2 % Vout - Line Regulation at Full Load
0,5-1 % Vout - Voltage Ripple (peak to peak)
<200kHz BAND (+48V) (+24V) - Voltage Spike (peak to peak)
< 20Mhz BAND (+48V) (+24V) - Holdup Capacitances
>30000 µF
Environmental Characteristics
- Low Temperature (Operating)
MIL-STD-810G, Method 502.5 Procedure II, +5°C - High Temperature (Operating)
MIL-STD-810G, Method 501.5 Procedure II, +40°C - Low Temperature (Storage)
MIL-STD-810G, Method 502.5 Procedure I, −50°C - High Temperature (Storage)
MIL-STD-810G, Method 501.5 Procedure I, +60°C - Humidity
MIL-STD-810G, Method 507.5, Procedure II
Other Characteristics
- 24Vdc output can be adjusted as 20, 22, 24, 26, 28 Vdc via computer interface
- Control via computer interface with ethernet communication infrastructure
- IP assignment can be done externally via signal connector up to 16 devices.
Electromagnetic Capability
MIL-STD-461G
- CE102
10 kHz- 10 MHz - CE106
1 MHz- 29 GHz - CS101
30 Hz- 150 kHz - CS114
10 kHz- 200 MHz - CS115 –
- CS116
10 kHz- 100 MHz - RE102
2 MHz- 18 GHz - RS103
30 MHz- 18 GHz - CS118
Contact discharge ±8kV
Non-contact discharge ±15kV
Mechanical Characteristics
- Dimensions
Width : 132±1mm
Height : 100±1mm
Length : 409±1mm - Weight : 13±0,2kg
- Mounting to cabinet
- Carrying handle on the front panel
Aksesuarlar
